Magus Tech Chapter 1060: The formal manufacture of nuclear weapons
Three and a half days later.
The tin wood was placed in the urgently restored No. 3 research room, and it was fixed in a huge glass container.
The container is filled with nutrient solution, and the tin wood floats quietly in the liquid, undulating and growing slowly.
Compared with the previous ones, this time the tin wood is restored from the state of the heart of the tree to the state of the tree, which is slightly different, and the process is slower and more cumbersome.
Xinmu's explanation for this is: because of two consecutive heavy injuries, his core original strength has been seriously affected. level.
In order to avoid this from happening, he needs to spend a period of time to consolidate the core source before regrowing. In this way, he can make his tree trunk harder, absorb more energy from the void, and have a stronger ability to stabilize energy fluctuations.
To sum it up, it was because I was beaten so badly before, and I was "destroyed" twice. This time he learned his lesson and prepared to develop a wave of wretchedness before doing other things.
As for the purpose of his obscene growth, whether it is for a better job or for another purpose, it is not clear.
In this regard, Li Cha didn't bother to guess whether it was true or not, but told Ximu very seriously: There is only one chance to forgive, and it was used up not long ago. So, either concentrate on your work and try to "reduce your sentence" so that you can get free sooner. Either continue to have dissent, and once discovered, it will be directly and completely destroyed.
After warning Ximu in this way, Li Cha finished all the finishing chores, so he was rarely free.
He gave himself a half-day vacation extravagantly, adjusted his physical condition and mental state to the best, and then started the last step of the nuclear weapons research and manufacturing plan - the manufacture of nuclear weapons.
…
Nuclear weapons production, begin!
Four days later, it was six o'clock in the morning.
"Click, click, click!"
In front of the lighting system console in the main laboratory, Li Cha operated a few times and reached out to press the button. Through the glass window, you can see the crystal walls on all sides of the Garden of Eden outside, and the placed lamps light up instantly, illuminating the entire Garden of Eden with soft light, like the rising sun, representing the beginning of a new day.
Li Cha looked at it, nodded in satisfaction, walked out of the main laboratory, and walked towards the machining sector.
…
Machining sector, No. 1 research room.
Li Cha opened the door and walked in, and saw that there was an extra silver-white metal table on the floor of the room compared to before.
It's a bit of an insult to say it's a metal table. The device in front of me looks a little bit bigger than an ordinary metal table. The "table top" alone is several square meters in size, and it is extremely strong. The sixteen "table legs" are thick and powerful, like the legs of an elephant, each of which is strong enough to withstand several tons of gravity without deformation. In order to accommodate various machine tools and equipment required for nuclear weapon manufacturing.
In addition, each table leg is inlaid with a spirit level—it is a graduated glass ball filled with half of the colored liquid, and the liquid level is used to determine whether it is level.
In addition, each table leg is equipped with a screw jack to ensure that the height, angle and other values of the table can be adjusted freely.
Li Cha walked in and glanced at the level gauge of the nuclear weapon on the table leg, because it had been adjusted in advance before, so now he found that it was completely in line with the standard.
"Hoo—"
Heaving a sigh of relief, Richard began to place all kinds of equipment needed around the metal table for the next manufacturing.
…
A few hours later.
A lot of equipment is properly arranged around and above the operating platform. Li Cha walked in with a huge metal block from outside the room, put it on the platform and started cutting.
"Crack..."
The long mechanical arm, under Li Cha's operation, kept making noises and moved its position on the metal block. The space iron ring inlaid at the end is like an indestructible blade, cutting off the excess metal parts quickly like cutting tofu, and storing these excess metal parts in an independent space without leaving any annoying garbage.
Because of Li Cha's proficiency, the cutting work progressed very quickly. After a while, an oval shell was completed.
This is the casing of a future nuclear weapon, in other words, the casing of an atomic bomb.
From the looks of it, the entire shell is about one meter high, and if measured accurately, it is ninety-five centimeters. This is so that it can be easily put into the space iron ring and carried around.
In comparison, the width of the shell is a little smaller, only about 60 centimeters.
Li Cha took out a measuring device, measured it accurately, and confirmed that it was exactly 62 centimeters, which was in line with the design data on the blueprint.
The shell of the nuclear weapon is manufactured. This is the first process of nuclear weapon manufacturing, and it is also the simplest process. In a sense, he used this process just to warm up his body, and there was no big consequence if he failed, and it didn't mean much victory if he succeeded.
The next process is the most important.
Moreover, one is more important than one.
"Tack tap..."
Li Cha stepped away from the console, walked to the side, picked up the cup, drank the nutrient solution in one gulp, took a few deep breaths, turned and walked out.
…
A few hours later.
Li Cha appeared in another functional sector of the Garden of Eden, and was busy in front of a furnace. What he was doing was sintering rhenium-tungsten alloy.
Rhenium-tungsten alloy, as the name suggests, is a material made of a mixture of metal tungsten and metal rhenium. Among them, the metal tungsten he needed had already been obtained, and the metal rhenium had also been obtained in sufficient quantity through Rice City.
At this time, he mixed metal tungsten and metal rhenium powders in strict proportions, then poured them into a mold, and pushed them into a furnace for heating.
The furnace in front of you, unlike ordinary furnaces, does not rely on burning fuel to generate high temperature. Instead, it has a built-in metal coil. After the current is turned on, it is heated by the principle of electromagnetic induction vortex heating ~IndoMTL.com~ In a sense, this is a huge induction cooker.
Therefore, when the device is in use, the short-term demand for power is high. Normally, he would have a little headache, thinking about how to modify the energy system circuit of Eden, so that the rest of the equipment will not be greatly affected when the electromagnetic furnace is used.
However, now in Pompeii, there is no need to be so troublesome. Just transfer the energy stolen from the belly of the volcano and use it directly.
"Crack!"
With a soft sound, Li Cha pressed the button on the furnace, switched on the circuit, the inside of the furnace brightened up, and began to heat the rhenium-tungsten alloy powder.
One second, two seconds, three seconds...
The temperature in the furnace rose rapidly, and after a while, the metal powder in the mold emitted a dazzling white light.
…
.